The good news for Bluetooth users is that the security scares, like most scares, are normally over dramatized and blown entirely out of proportion. The truth being told, these issues are easy to manage, with various measures already in place to provide security for Bluetooth technology.

It’s true that there has been some Bluetooth phones that have been hacked into. Most devices that are hacked into are normally those that don’t have any type of security at all.

According to Bluetooth specialists, in order to hack into a Bluetooth device, the hacker must:
1. Force two paired devices to break their connection.
2. Steal the packets that are used to resend the pin.
3. Decode the pin.
Of course, the hacker must also be within range of the device, and using very expensive developer type equipment. Most specialists recommend that you have a longer pin, with 8 digits being recommended.

Fundamentals of security
The “pairing process” is one of the most basic levels of security for Bluetooth devices. Pairing, is two or more Bluetooth devices that recognize each other by the profiles they share - in most cases they both must enter the same pin.

The core specifications for Bluetooth use an encryption algorithm, which is completely and entirely secure. Once the devices pair with each other, they too become entirely secure.

Until they have successfully paired, the Bluetooth devices won’t communicate with each other. Due to this pairing process and the fact that it is short range - Bluetooth technology is considered to be secure. As the news has indicated, experienced hackers have developed ways to get around this level of basic security.

With Bluetooth becoming more and more popular, it’s really no wonder that security is always in question. If you’ve been concerned about Bluetooth security in the past, rest assured that newer devices will offer bigger and better security. Preventing hackers from getting in is something every owner is concerned about - and the manufacturer’s are very aware.

When one Bluetooth device comes in contact with another, they will automatically exchange addresses and details of capability. The protocols involved with handle both data and voice, with a very flexible topography.

The technology achieves its goal by embedding tiny, non expensive short range tranceivers into the devices available today. The radio operates on the 2.45 GHz frequency band, and supports up to 721KBps, along with three voice channels.

Each devices offers a unique 48 bit address from the IEEE 802 standard, with the connections being point to point or multipoint. The max range is 10 meters, although it can be extended to 100 meters by increasing the power. The devices are also protected from radio interference by changing their frequencies, also known as frequency hopping.

What’s important, is the fact that Bluetooth devices won’t drain battery life. The specification targets power consumption of the device, limiting the drain on the battery. The radio chip will consume only 0.3mA in stand by mode, which is less than 5% of the power that standard phones use.

Bluetooth will also guarantee security at the bit level. The authentification is controlled by the user via a 128 bit key. The radio signals can be coded with anything up to 128 bit. With the frequency hopping, Bluetooth is already very hard to listen into.

The baseband protocol is a combination of both circuit and packet switches. Slots can be reserved for synchronous packets as well. Each packet will be transmitted in a different hop frequency. Normally, a packet covers a single slot although it can be extended to cover up to five slots.

Bluetooth can also support data channels of up to three simultaneous voice channels. Each individual voice channel will support 64 KB.

From a technical standpoint, Bluetooth is very different indeed. It’s the best wireless method in the world, surpassing even infrared.